Vehicles for Classified Joes

CNR1993 · 11-21-2022, 12:51 PM

Quote:

Originally Posted by IzzyTipsy

Maisto cycles definitely fit Classified well. And other lines. Had one I bought for a Figma Saber years ago that looks like it stepped out of the anime she used it in.

And they have so many different types of bikes too... And super cheap, compared to official classified stuff.

Goldchains · 11-21-2022, 01:26 PM

I found the seller on ebay that does a lot of excellent 3d printed Classified scale stuff: candb_superprints

They have a LAW, a MMS, a SMS, an Adder, and some really nice throne selections.

Goldchains · 12-02-2022, 09:30 PM

Saw this at one of my local toy shops. 3D printed Moccasin with custom Copperhead. Removable engine cover and top window. Stickered perfectly. Vanes were a little iffy, but were presentable. I was sorely tempted to buy it.

Fred Broca · 12-04-2022, 12:35 PM

Quote:

Originally Posted by Goldchains

Saw this at one of my local toy shops. 3D printed Moccasin with custom Copperhead. Removable engine cover and top window. Stickered perfectly. Vanes were a little iffy, but were presentable. I was sorely tempted to buy it.

Am I trippin' or does the Water Moccasin seemed to be undersized?

Goldchains · 12-04-2022, 12:45 PM

Quote:

Originally Posted by Fred Broca

Am I trippin' or does the Water Moccasin seemed to be undersized?

It was a little undersized honestly, and I'm not sure what wrestler they used for Copperhead, because he didn't fit in the cockpit very well at all. I think it could be a lot longer/at least 25% larger. Still looked pretty cool and quite sharp for being 3d printed.

Mr Hebime · 12-04-2022, 02:54 PM

I wish that the guys that print these would start switching to 1/10 scale. The Classified figures are on the large end of the 1/12 scale and a lot of these vehicles just look too small for them.

GoodGuy9 · 12-04-2022, 05:29 PM

Quote:

Originally Posted by Mr Hebime

I wish that the guys that print these would start switching to 1/10 scale. The Classified figures are on the large end of the 1/12 scale and a lot of these vehicles just look too small for them.

They're still not display worthy to me either, these people get points for trying but they're still not professional enough for me to display

Fred Broca · 12-30-2022, 03:23 AM

Fred Broca · 01-06-2023, 11:01 AM

11-21-2022, 01:26 PM	#92
Goldchains Packed with Fiber! Join Date: Sep 2020 Location: Cincinnati, OH Posts: 1,514	I found the seller on ebay that does a lot of excellent 3d printed Classified scale stuff: candb_superprints They have a LAW, a MMS, a SMS, an Adder, and some really nice throne selections. __________________

12-02-2022, 09:30 PM	#93
Goldchains Packed with Fiber! Join Date: Sep 2020 Location: Cincinnati, OH Posts: 1,514	Saw this at one of my local toy shops. 3D printed Moccasin with custom Copperhead. Removable engine cover and top window. Stickered perfectly. Vanes were a little iffy, but were presentable. I was sorely tempted to buy it. __________________

12-04-2022, 12:35 PM	#94
Fred Broca Ne Plus Ulta Join Date: Jun 2009 Location: Brooklyn Posts: 2,550	Quote: Originally Posted by Goldchains Saw this at one of my local toy shops. 3D printed Moccasin with custom Copperhead. Removable engine cover and top window. Stickered perfectly. Vanes were a little iffy, but were presentable. I was sorely tempted to buy it. Am I trippin' or does the Water Moccasin seemed to be undersized? __________________

12-04-2022, 12:45 PM	#95
Goldchains Packed with Fiber! Join Date: Sep 2020 Location: Cincinnati, OH Posts: 1,514	Quote: Originally Posted by Fred Broca Am I trippin' or does the Water Moccasin seemed to be undersized? It was a little undersized honestly, and I'm not sure what wrestler they used for Copperhead, because he didn't fit in the cockpit very well at all. I think it could be a lot longer/at least 25% larger. Still looked pretty cool and quite sharp for being 3d printed. __________________

12-04-2022, 02:54 PM	#96
Mr Hebime Joe Gramps Join Date: May 2012 Location: NJ ▬▬ι═══════ﺤ Posts: 15,534	I wish that the guys that print these would start switching to 1/10 scale. The Classified figures are on the large end of the 1/12 scale and a lot of these vehicles just look too small for them. __________________ Feedback BST Collection

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Classified size compatible vehicles	jmc2915	G.I. Joe Toys Modern & General Discussion	57	12-20-2021 08:18 PM
Vehicles Classified Joes. M113 APC	Stonewall	G.I. Joe Customs Works In Progress	8	04-12-2021 11:12 PM
Classified lot of Joes (8) Target exclusives	GIJoeComics08	G.I. Joe Buy Sell Trade	1	11-18-2020 01:02 AM
Questions are the extreme vehicles campatible with classified?	jmc2915	G.I. Joe Customs General Discussion	2	11-11-2020 11:09 PM
Questions Disassembly of 6” Classified Joes.	Outback 2094	G.I. Joe Customs General Discussion	3	09-29-2020 05:14 PM