Vehicles Goliath - Modular Heavy Transport

matchmade · 08-31-2024, 11:37 PM

Quote:

Originally Posted by Biohazard326

this is AMAZING (i signed up basically to just comment that for this post lol)

Thanks! I have put more detail and "play features" into this design than any I've done before and coupled with its large size has meant this project has taken a lot longer than I anticipated.

Quote:

Originally Posted by DMC

I am really enjoying following your build. This is awesome work.

Thanks! I will keep posting updates.. it might be a couple days because all the parts I have ready for print are printed... so it's back to my nose buried in Blender for a bit while I get the next section prepared.

The time this has taken I fear lost me a couple of Patreon supporters that were more accustomed to me releasing a vehicle or two every month. But, honestly the engine compartment alone on this was as much work as an entire vehicle and the cab, I think it'll be just as time consuming.

matchmade · 09-02-2024, 11:23 PM

Goliath has a rear end now... next up is to start finishing up the cab.

matchmade · 09-07-2024, 12:37 PM

Next batch of Goliath parts ready for test print and printing is under way.

matchmade · 09-08-2024, 12:38 AM

Interior test print a success! Now on to the outer shell of the cab.

matchmade · 09-08-2024, 11:37 PM

Spent today working on the doors... not as simple as it sounds...

DMC · 09-09-2024, 02:28 AM

I really like how you did the seats. It?s a great look.

matchmade · 09-09-2024, 11:54 PM

Quote:

Originally Posted by DMC

I really like how you did the seats. It?s a great look.

Thanks!!

Front Clip testing in progress.. a couple small tweaks to make and re-prints.

matchmade · 09-13-2024, 12:32 AM

A couple of issues that I only noticed after the print... (144g of filament wasted...ugh) so reprinting now but was still able to put it on the truck and test fit...

MagicWazard · 09-13-2024, 02:30 AM

Looking good! Man, you must have gone thru a ton of filament so far.

matchmade · 09-13-2024, 02:34 AM

Quote:

Originally Posted by MagicWazard

Looking good! Man, you must have gone thru a ton of filament so far.

LOL.. yes I have. I will go back through and get an estimate when it's all said and done.. but I think I'm somewhere in the neighborhood of about $60 in just filament costs alone. Including the parts that didn't turn out right and had to be reprinted. The 10 tires was about $12 worth of TPU. But this beast is huge, heavy and I love it so much.

08-31-2024, 11:37 PM	#21
matchmade Cobra Viper Join Date: Jan 2014 Location: Nashville Posts: 374	Quote: Originally Posted by Biohazard326 this is AMAZING (i signed up basically to just comment that for this post lol) Thanks! I have put more detail and "play features" into this design than any I've done before and coupled with its large size has meant this project has taken a lot longer than I anticipated. Quote: Originally Posted by DMC I am really enjoying following your build. This is awesome work. Thanks! I will keep posting updates.. it might be a couple days because all the parts I have ready for print are printed... so it's back to my nose buried in Blender for a bit while I get the next section prepared. The time this has taken I fear lost me a couple of Patreon supporters that were more accustomed to me releasing a vehicle or two every month. But, honestly the engine compartment alone on this was as much work as an entire vehicle and the cab, I think it'll be just as time consuming. __________________ Come hangout with me on YouTube while I livestream designing stuff! Follow Tanner3D on YouTube \| Download and 3D print my designs on Printables.com

09-02-2024, 11:23 PM	#22
matchmade Cobra Viper Join Date: Jan 2014 Location: Nashville Posts: 374	Goliath has a rear end now... next up is to start finishing up the cab. __________________ Come hangout with me on YouTube while I livestream designing stuff! Follow Tanner3D on YouTube \| Download and 3D print my designs on Printables.com

09-07-2024, 12:37 PM	#23
matchmade Cobra Viper Join Date: Jan 2014 Location: Nashville Posts: 374	Next batch of Goliath parts ready for test print and printing is under way. __________________ Come hangout with me on YouTube while I livestream designing stuff! Follow Tanner3D on YouTube \| Download and 3D print my designs on Printables.com

09-08-2024, 12:38 AM	#24
matchmade Cobra Viper Join Date: Jan 2014 Location: Nashville Posts: 374	Interior test print a success! Now on to the outer shell of the cab. __________________ Come hangout with me on YouTube while I livestream designing stuff! Follow Tanner3D on YouTube \| Download and 3D print my designs on Printables.com

09-08-2024, 11:37 PM	#25
matchmade Cobra Viper Join Date: Jan 2014 Location: Nashville Posts: 374	Spent today working on the doors... not as simple as it sounds... __________________ Come hangout with me on YouTube while I livestream designing stuff! Follow Tanner3D on YouTube \| Download and 3D print my designs on Printables.com

09-13-2024, 02:30 AM	#29
MagicWazard Soldier of Misfortune Join Date: Apr 2016 Location: Out of direct sunlight Posts: 4,251	Looking good! Man, you must have gone thru a ton of filament so far. __________________ "Wazard" with an "A" Currently trying to sell off a ton of my Joe collection, across all eras, and lots of other odds and ends. Please take a look! B/S/T B/S/T Feedback My 3D-printed battlefield props and dio accessories thread (on hiatus) Photo albums on Flickr: Battlefield/Diorama/Scenery Accessories -- Weapons -- Restoration & mod parts

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vehicles HISS HVAT - Heavy Viper Armored Transport	Stormgard	G.I. Joe Customs Finished Projects	5	12-30-2018 09:09 PM
Vehicles AT Universal Heavy Transport by Squashfest	Squashfest	G.I. Joe Customs Finished Projects	18	07-07-2016 09:23 AM
Figures Goliath transport (Dropship) pic heavy	wildstar09	G.I. Joe Customs Finished Projects	60	02-29-2016 11:54 PM
Non G.I. Joe Goliath Transport ( Wildstar)	wildstar09	G.I. Joe Customs Works In Progress	32	06-18-2015 10:13 AM
Vehicles Goliath - Cobra MRAP truck and part of the Heavy Hauler division by Dremel	Dremel	G.I. Joe Customs Finished Projects	23	01-22-2015 07:27 PM