|
![]() |
|
Thread Tools |
![]() |
#1 |
orange and blue guy
Join Date: Mar 2009
Location: Pacific Northwest
Posts: 1,171
|
Sharing this because I hope that one of you out there will learn to do it better and leave me in the dust, so I'm starting up a thread for all my work-in-progress pictures...
Last edited by ARBCO Avenue; 09-18-2020 at 10:50 PM.. |
![]() |
![]() |
![]() |
#2 |
orange and blue guy
Join Date: Mar 2009
Location: Pacific Northwest
Posts: 1,171
|
This Scarlett was edging towards coming together together when the recent custom contest was announced. I've had some questions on how she was made. So I thought I'd share them here. Motivation for this Scarlett: MTF parts or HACKS parts alone just didn't cut it for the Scarlett look I wanted, but could they be combined?
The base head is the Penthesilea sculpt from a Boss Fight blank. The shaggy straight bangs needed to go. The original plan was to have no bangs: ![]() This sculpt has a very intense gaze, probably should be painted with sclera showing above the irises to properly capture the intensity in the eyes, but I didn't go that way. Another big thing to do was combine the MTF T-shirt torso and the HACKS blank abdomen. I wrapped a HACKS blank torso in cellophane, and mashed greenstuff around it. When it dried, I cut the greenstuff in two parts, into a front and back, and carved around the bottom of it until it was a useful guide for cutting the T-shirt torso down. Stuck the Tshirt into this form, and marked where the cuts should be made. I had to insert the HACKS joint into the MTF T-shirt torso that I had cut down so they would fit together, and I like how it came out: ![]() I almost went with full MTF arms, but chose HACKS. In the end, the forearms, upper torso, and lower arms were from MTF, the rest a HACKS blank: ![]() Painted up: ![]() In the end, the no-bangs look wasn't right. MTF bangs to the rescue, sliced very thin and glued in place: ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Sphinx
Join Date: Jun 2016
Location: Cris Carter Fall Guy Camp
Posts: 7,272
|
Wow. You're paint job on that Penesthelia head is absolutely killer, because I hate that head, in general- but your finished product is among my favorite Scarlett heads that I've seen.
Stellar work.
__________________
![]() AxonRey’s Servicable Customs (perpetually under construction): http://www.hisstank.com/forum/g-i-jo...masterhub.html All Purpose Custom Talk: http://www.hisstank.com/forum/g-i-jo...ml#post5316347 |
![]() |
![]() |
![]() |
#4 |
orange and blue guy
Join Date: Mar 2009
Location: Pacific Northwest
Posts: 1,171
|
Thanks Ax, that means a lot. The perfect look for Scarlett is still out there somewhere.
|
![]() |
![]() |
![]() |
#5 |
Iron Grenadier
Join Date: Jul 2009
Location: US
Posts: 525
|
Looks good I really like it.
__________________
![]() https://www.instagram.com/sizemore77...actionfigures/ Check out Best of the 80s Custom Project http://www.hisstank.com/forum/g-i-jo...m-project.html |
![]() |
![]() |
![]() |
#6 |
Bald Master
Join Date: Apr 2011
Location: Wolverine Lake, MI
Posts: 10,970
|
Bangs from which MTF figure?
Excellent work on the torso fit—speaks to your work that I really didn’t notice earlier! I also agree with that head paint job. Eyes intimidate me, and you knocked it out of the park. *I’m glad you are making a custom thread for all of your work. It’s the way to go.
__________________
"Once got busy in the back of a Buzz Boar!" ![]() FEEDBACK: http://www.hisstank.com/forum/buy-se...ck-thread.html B/S/T: http://www.hisstank.com/forum/g-i-jo...ml#post3892516 |
![]() |
![]() |
![]() |
#7 |
orange and blue guy
Join Date: Mar 2009
Location: Pacific Northwest
Posts: 1,171
|
Thank you
Quote:
Bangs from which MTF figure?
Excellent work on the torso fit—speaks to your work that I really didn’t notice earlier! I also agree with that head paint job. Eyes intimidate me, and you knocked it out of the park. *I’m glad you are making a custom thread for all of your work. It’s the way to go. ![]() As for the MTF head, it was the Athena with short hair: Here are the bangs before they were fully fitted and glued. A wispier look would've been nice, but to attach it well, I had to make it more flush: ![]() |
![]() |
![]() |
![]() |
#8 |
orange and blue guy
Join Date: Mar 2009
Location: Pacific Northwest
Posts: 1,171
|
Now something a little more fun and unexpected was this impromptu technique for making throwing stars. I made a small box, poured hot glue in it, then rammed a star-head screwdriver bit into it. Once it cooled, I cut off the end so it was open on both sides and pushed green stuff through. After that set, I chopped it up and chose the best shapes:
![]() ![]() I realize that MTF makes throwing stars, and bought them for this purpose, but I thought they were a bit big and easy to knock off the arm. |
![]() |
![]() |
![]() |
#9 |
Crimson Guard
![]() Join Date: Sep 2017
Location: U.S.
Posts: 1,718
|
Awesome write-up, ARBCO. Thanks for sharing details on how you did the creative touches like the hair and the throwing stars.
One interesting side effect of using a hex-bit driver head for the shape of the throwing stars is that the six-point nature of it in silver against a tan/khaki background reminds of a sheriff's badge pinned atop natural leather, adding a slight Western feel to her character, which thematically implies an air of toughness and fortitude. Dunno if that was intentional but it's really cool. |
![]() |
![]() |
![]() |
#10 |
Extensive Enterprises Rep
Join Date: Apr 2010
Location: Alabama
Posts: 3,904
|
Out fucking standing!
The amount of work you put into this is off the charts. The sculpting is great, the freckles are a brilliant touch, and you nailed the iconic look. Super impressive work man!
__________________
My Custom Marauders Joe vs Cobra Project Link: http://www.hisstank.com/forum/g-i-jo...kuh_rupht.html FB link: https://m.facebook.com/KR-Customs-10...?ref=bookmarks ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vehicles Arbco 18 wheeler | Voice of Reason | G.I. Joe Customs Finished Projects | 8 | 09-18-2019 10:51 PM |
Non G.I. Joe some Halo joes i have been workin on joe scale. | mikey77 | G.I. Joe Customs Finished Projects | 3 | 09-02-2012 11:12 AM |
So I'm workin on an Ash custom... | Destro's Son | G.I. Joe Customs Finished Projects | 12 | 12-12-2009 08:22 PM |
UH OH! I think cobras workin with the nazis! | boba fett | G.I. Joe Customs Finished Projects | 8 | 05-02-2008 10:41 PM |
|
|