Vehicles 1985 MAULER custom RC with suspension

Joecollection18 · 11-05-2020, 11:14 PM

Finally got to upload some on youtube:
https://m.youtube.com/channel/UC9voe...EXM27HQ/videos

3D printed the suspension units, antennas and tow cables.

CG23 · 11-05-2020, 11:36 PM

Very impressive!

rcjunkie · 11-06-2020, 04:08 PM

That's really cool! Keep updating.

Joecollection18 · 11-06-2020, 05:10 PM

More pics
I picked up a few maulers in different shapes. One was running really bad.. turns out the MOTOR itself was improperly assembled at the Mabuchi factory, so it was running 1/3 of the power.
I feel so bad for the poor kid who got this expensive toy and it ran really bad.

Also, for anyone restoring Maulers... the stock gears are too close. I bevel the edges/ shave the edges with a sharp blade and lube the bearing surfaces Individually. It makes a difference, runs smoother and shifts better. The picture shows a stock arrangement.

I made RC conversions over the years using existing 1/24 scale RC tanks.
Lately the electronics and power source are much much more compact than what they used to be.
The tamiya gearbox costs $15 and its gears can be replaced. A 3D printed gearbox brace holds the gearbox with no modifications to the mauler.( press fit inside the square hole)

Also shown 3D printed wheels for the Equalizer, for RC conversion. The Brazilian plastic is mich stiffer and more brittle than the American made mauler.
Regardless, it is a good looking machine.

Next, I think it is feasible to have a third figure in the turret, with a proper hatch. Since the large gearbox is gone, there is ample room for a turret basket and more goodies.
Eventually , will get to a turret drive and gun elevation system, as well as a firing mech.
What should this firing mech be?
Lazer? Infra red? BBs Or plastic pellets? Cap firing? Water squirting? Sound and smoke? Bright flash?
Bb shooting will be difficult given the barrel diameter. I am also looking for something fitting this toy rather than go full hobby grade.

Dusty777 · 11-06-2020, 05:48 PM

wow. very impressive work. super cool

swampmojo · 11-06-2020, 06:13 PM

Just WOW

Techmonkey · 11-30-2020, 01:36 PM

Do you have the STL or Step files for your mods? I just got my mauler out for my son and he is loving it. I would love to upgrade this bad boy. I forgot how well made the original GI Joe toys were made.

Mr Hebime · 11-30-2020, 05:57 PM

I just checked out one of the YouTube vids and I gotta say you did some amazing work!

HitandRun · 11-30-2020, 06:09 PM

Very cool!!! Great work. I really love the retooled Equalizer. Does the Lynx turret fit into the hole on the Equalizer chassis or did you have to do some mods? I am not a customizer but that is one thing I have always wanted to do myself.

Joecollection18 · 11-30-2020, 10:56 PM

Quote:

Originally Posted by Techmonkey

Do you have the STL or Step files for your mods? I just got my mauler out for my son and he is loving it. I would love to upgrade this bad boy. I forgot how well made the original GI Joe toys were made.

Sure thing, give me some time to gather them, sort.
Any suggestion where I could upload them?
I should make a how to video as well.

11-05-2020, 11:14 PM	#1
Joecollection18 Mauler pool Join Date: Oct 2018 Location: Usa Posts: 25	Finally got to upload some on youtube: https://m.youtube.com/channel/UC9voe...EXM27HQ/videos 3D printed the suspension units, antennas and tow cables. Attached Thumbnails Last edited by Joecollection18; 01-02-2021 at 07:22 PM..

11-05-2020, 11:36 PM	#2
CG23 CG Immortal Commander Join Date: Feb 2008 Location: New York Posts: 17,750	Very impressive! __________________ Quote: Originally Posted by Money-B No one promised an easy life for a CG. But the pay and benefits are top notch. Quote: Originally Posted by The Batman I am a figment of your Hisstank Imagination. Your just pretending that your seeing me post right now. B/S/T Listhttp://www.hisstank.com/forum/g-i-jo...rade-list.html

11-06-2020, 04:08 PM	#3
rcjunkie Iron Grenadier Join Date: Dec 2010 Location: CA Posts: 670	That's really cool! Keep updating. __________________ http://www.hisstank.com/forum/buy-se...ck-thread.html

11-06-2020, 05:10 PM	#4
Joecollection18 Mauler pool Join Date: Oct 2018 Location: Usa Posts: 25	More pics I picked up a few maulers in different shapes. One was running really bad.. turns out the MOTOR itself was improperly assembled at the Mabuchi factory, so it was running 1/3 of the power. I feel so bad for the poor kid who got this expensive toy and it ran really bad. Also, for anyone restoring Maulers... the stock gears are too close. I bevel the edges/ shave the edges with a sharp blade and lube the bearing surfaces Individually. It makes a difference, runs smoother and shifts better. The picture shows a stock arrangement. I made RC conversions over the years using existing 1/24 scale RC tanks. Lately the electronics and power source are much much more compact than what they used to be. The tamiya gearbox costs $15 and its gears can be replaced. A 3D printed gearbox brace holds the gearbox with no modifications to the mauler.( press fit inside the square hole) Also shown 3D printed wheels for the Equalizer, for RC conversion. The Brazilian plastic is mich stiffer and more brittle than the American made mauler. Regardless, it is a good looking machine. Next, I think it is feasible to have a third figure in the turret, with a proper hatch. Since the large gearbox is gone, there is ample room for a turret basket and more goodies. Eventually , will get to a turret drive and gun elevation system, as well as a firing mech. What should this firing mech be? Lazer? Infra red? BBs Or plastic pellets? Cap firing? Water squirting? Sound and smoke? Bright flash? Bb shooting will be difficult given the barrel diameter. I am also looking for something fitting this toy rather than go full hobby grade. Attached Thumbnails Last edited by Joecollection18; 01-02-2021 at 07:11 PM..

11-06-2020, 06:13 PM	#6
swampmojo my mothers machine Join Date: Aug 2008 Location: Franklinton Posts: 926	Just WOW __________________ TOOO FUNNY http://www.funnyordie.com/videos/076...lad-of-g-i-joe use things and love people, never love things and use people.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GI Joe 1985 Mauler M.B.T. Tank - Motor and Battery Assembly Photos for Reference	Zap Rowsdower	G.I. Joe Toys Vintage Discussion	0	10-17-2016 04:39 PM
1985 mauler parts.	Battlewagon22	G.I. Joe Buy Sell Trade	0	12-15-2015 11:26 PM
1985 Mauler mudflaps	Captain Chunk	G.I. Joe Toys Vintage Discussion	10	10-29-2013 05:11 PM
1985 Mauler MBT driver Heavy metal	nighthawk21	G.I. Joe Toys Vintage Discussion	8	05-05-2013 10:41 PM