[Jonathan]

I found the risers in housewares.

The UPC code is 0 33789 22424 4, if that helps. =)

[QBERT]

Quote:

Originally Posted by Jonathan

I found the risers in housewares.

The UPC code is 0 33789 22424 4, if that helps. =)

in WALMART???

[Ev!L ErN!E]

Quote:

Originally Posted by QBERT

in WALMART???

yes, he said WalMart

[Ev!L ErN!E]

Quote:

Originally Posted by tuan_tran73

last week, I just purchased these 2 Bertby wall cabinets from Ikea. They are awesome.
HissTank.com - G.I. Joe - tuan_tran73's Album: Collection Gallery - Picture

Those things are awsome... how much do they run? I'm running out of display space and these would be perfect....

[Blackdragon]

Quote:

Originally Posted by Scoop

That's a good idea.

Here's another tip that might help you the next time you decide to put up shelves.

Measure the length of the shelf. Then divide that number in half. Then divide that number in half again. When you have that final number you will use it to place the supports in that distance from each end.

Lets say the shelf is 4 feet long (48 inches). Half of that is 24 and half of that is 12. If you place the supports 12 inches in from each end then you will be left with 24 unsupported inches in the middle.

If that doesn't work for you I guess you could always go a third of the way in from each end of the shelf for even more support. Like if you had a 3 foot shelf you could put a support in at 1 foot from each end.

This method is better than the way you have your supports set up now because each support is almost at each end of the shelf. If that shelf was 48 inches long you would have about 46 to 48 inches that was left unsupported.

A third support in the middle would be great for the way you have it set up now, but it is not needed if you just move the 2 supports you have now in more from the edge.

I'm not a professional carpenter or anything like that, but this is the way I put up my shelves and so far so good without any bends in the middle.

It saves money too using 2 supports instead of 3.

The reason i went so far apart is because i drilled the screws straight into the studs. Thats how far apart the studs are from each other. There is one stud running down the middle of each of my display for a third support to be drilled into so I lucked out. I guess i could have used the one in the middle with the left or right stud but i thought that might be too short at the time. Oh well easy fix.

[tuan_tran73]

Quote:

Originally Posted by Ev!L ErN!E

Those things are awsome... how much do they run? I'm running out of display space and these would be perfect....

Those are Berby, and it costs $99.99 a piece at Ikea.

[Blackdragon]

Added that third middle support to my shelving displays. Looks better now.





Got my Mindbender in yesterday

[tuan_tran73]

[QUOTE=Blackdragon;794580]Added that third middle support to my shelving displays. Looks better now.

I can't tell you how much I love your Cobra Commander Statue.

[Snake Eyes00]

http://i435.photobucket.com/albums/q...g?t=1244840082

[Flame Viper]

Man, blackdragon. Your displays are amazing. I hope I can have that kind of room someday.