Rock N Roll and Short Fuze

*Updated RnR in post #11*

So, I took the rolled sleeves of Rock N Roll and hollowed it out and shaved a bit off the bicep part and put it on so he has rolled up sleeves with muscular arms. Let me know what you think.




Short Fuze: all I did was shorten the neck on a CP Duke and put all his gear on him and the feet from Clutch.

nice modifications.

Good job Cal all u need is the H harness for SF

I drilled a hole in the top of Short Fuze's mortar so it looks like you can actually put something in it. If I find one of those mortar shells that came with BBI figures, I can put it in to look like Short Fuze is loading it.

nice work man

nice mod very nice improvement

Nice improvements.

I had a few people ask how I did the mod, so here's how it was done:
First, I boil and popped the Rock N Roll arms and his hands out. Then I cut the sleeve cuff off at the top and bottom and just used an exacto knife to clean out the inside of it so it's just a ring left. Then I trimmed the sleeve on the upper arm on each side and stretched the cuff over it so it's tight. Then just popped on the SkyDuster's arms. Simple as that. Only tool needed is an exacto knife.

Originally Posted by nighthawk

I had a few people ask how I did the mod, so here's how it was done:
First, I boil and popped the Rock N Roll arms and his hands out. Then I cut the sleeve cuff off at the top and bottom and just used an exacto knife to clean out the inside of it so it's just a ring left. Then I trimmed the sleeve on the upper arm on each side and stretched the cuff over it so it's tight. Then just popped on the SkyDuster's arms. Simple as that. Only tool needed is an exacto knife.

"Sleeve Rings" are at it again. I just can't get enough of this modification method!

Thanks. The other thing I did to Rock N Roll which I didn't mention (due to the fact that I keep forgetting I did this) was change out his knife holster for a gun holster.